C
CARLOS
Guest
VERY SIMPLE JUST TURN YOUR PC OFF AND GO TO THE MOTHERBOARD.
REMOVE THE JUMPER CMOS WILL ERASE LAST BOOT .
YOU WILL SEE THE PINS 1,2,3
TURN ON SEE BIOS WILL TELL YOU CMOS IS WRONG AND TURN OFF AGAIN
PUT IT BACK ON SAME PLACE
CLOSE THE CASE AND TURN IT ON AND DONE!!!!
"ms" wrote:
> When I booted computer up the following message appears and I don't know how
> to reinstall the file it is asking for. I tried to go to safe mode but
> nothing happens.
>
> Windows could not start because the following file is missing or corrupt;
> system 32\hal.dll.
> reinstall a copy of above file
REMOVE THE JUMPER CMOS WILL ERASE LAST BOOT .
YOU WILL SEE THE PINS 1,2,3
TURN ON SEE BIOS WILL TELL YOU CMOS IS WRONG AND TURN OFF AGAIN
PUT IT BACK ON SAME PLACE
CLOSE THE CASE AND TURN IT ON AND DONE!!!!
"ms" wrote:
> When I booted computer up the following message appears and I don't know how
> to reinstall the file it is asking for. I tried to go to safe mode but
> nothing happens.
>
> Windows could not start because the following file is missing or corrupt;
> system 32\hal.dll.
> reinstall a copy of above file