Windows 2019 Server won't boot after adding a HDD

  • Thread starter Thread starter Distorted Vision
  • Start date Start date
D

Distorted Vision

Guest
I've had this issue before. I have a clean install of WIndows 2019 Server on a HP Proliant Gen8 Microserver.I installed it with just a SSD.I then powered it off and added a HDD which is GPT and NTFS formatted with data on it. But it won't boot afterwards and gives error:"Non-system disk or disk error"The reason I installed Windows Server without the HDD installed is because it would convert the HDD to MBR and put the System Reserved Partition on it. The problem is I'd lose 2Tb of a 5Tb HDD because MBR only supports 2Tb. It seems ridiculous that you cannot add a HDD afterwards and doesn't seem

Continue reading...
 
You must log in or register to reply here.

Similar threads

B
HDD is not Detected After a Blue Screen of Death
Replies
0
Views
5
Bystrík Královič
B
T
Can’t boot up a m2 ssd drive with win10 installed
Replies
0
Views
15
Techgreen
T
C
Windows reboot loop after adding an SSD?
Replies
0
Views
6
Connor McGuire1
C
B
HDD is not Detected After a Blue Screen of Death
Replies
0
Views
7
Bystrík Královič
B
S
Sabertooth 990FX PCI16, GTX 1080, No HDMI or DVI or checking two different graphic cards worked after running windows on 2TB drive and adding 250GB wi
Replies
0
Views
6
s y_3
S
Back
Top