J
Juraj122
Guest
Hello,
I recently upgraded my computer from windows 7 to windows 10. I installed all updates, updated all drivers with DriveEasy, but the system doesn't work as it should:
1. hard disks are connected on second or third attempt (repeated rebooting is required)
2. if copying a large amount of data, the hard disk disconnect (disappear from explorer, copying fails, disks are missing in disk management)
This is the information about my hardware and system:
Driver Easy TXT Report
-------------------------------------------------------------------------
Binaries
-------------------------------------------------------------------------
Driver Easy version v5.6.15
Overview
-------------------------------------------------------------------------
Machine Gigabyte Technology Co., Ltd.
Operating System Microsoft Windows 10 Pro (64-bit)
Memory 8 GB
Processor Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Motherboard Gigabyte Technology Co., Ltd. - B75-D3V
Video Cards NVIDIA GeForce GTX 1060 6GB
Monitors ASUS VH222H
Hard Disk ST8000DM004-2CX188 (8.0 TB)
Network Card WAN Miniport (SSTP)
CPU
-------------------------------------------------------------------------
Processor
Name Intel Core i5 2500K
Code Name Sandy Bridge
TDP 95 W
Package Socket 1155 LGA
Technology 32 nm
Core Voltage 0.97 V
Specification Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Family 6
Model --
Stepping --
Ext. Family --
Ext. Model --
Revision D2
Instructions MMX , SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, x86-64, NX, VMX, AES, AVX
Clocks
Core Speed 1596.2 MHz
Multiplier x 16
Bus Speed 99.8 MHz
QPILink --
Cache
L1 Data 4 x 32 KBytes
L1 Inst 4 x 32 KBytes
Level 2 4 x 256 KBytes
Level3 6144 KBytes
Motherboard
-------------------------------------------------------------------------
Motherboard
Manufacturer Gigabyte Technology Co., Ltd.
Model B75-D3V x.x
Chipset Intel Sandy Bridge
Revision 09
Southbrige Intel P75/B75
Revision 04
LPCIO --
BIOS
Core Speed American Megatrends Inc.
Version F9
Date 10/23/2013
Graphic Interface
Version --
Transfer Rate --
Max. Supported --
Memory
-------------------------------------------------------------------------
General
Type DDR3
Size 8192 MBytes
Channel# --
DC Model --
NB Frequency --
Timings
DRAM Frequency 665.1 MHz
FSB
RAM --
CAS# Latency(CL) 9 clocks
RAS# to CAS# Delay(tRCD) 9 clocks
RAS# Precharge(tRP) 9 clocks
Cycle Time(rRAS) 24 clocks
Bank Cycle Time(tRC) --
Command Rate(CR) 1 clocks
Graphics
-------------------------------------------------------------------------
GPU
Name NVIDIA GeForce GTX 1060 6GB
Code Name GP106
Technology 16 nm
Revision --
Clocks
Core 1544 MHz
Shader --
Memory 4006.8 MHz
Memory
Size 6144 MBytes
Type 8
Bus Width --
Device name DESKTOP-1TNAJT7
Processor Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz 3.70 GHz
Installed RAM 8.00 GB
Device ID E2AB6EB7-2C4E-4810-9673-5E3D1CC8DA76
Product ID 00330-80000-00000-AA827
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Pro
Version 20H2
Installed on 4/4/2021
OS build 19042.906
Experience Windows Feature Experience Pack 120.2212.551.0
How could I fix this problem, please? Since I updated the system and the drivers to the maximum, I feel like I am out of options. Could you give me an advice, how to proceed please? I would very much appreciate your help. Thank you and all the best, Juraj
Continue reading...
I recently upgraded my computer from windows 7 to windows 10. I installed all updates, updated all drivers with DriveEasy, but the system doesn't work as it should:
1. hard disks are connected on second or third attempt (repeated rebooting is required)
2. if copying a large amount of data, the hard disk disconnect (disappear from explorer, copying fails, disks are missing in disk management)
This is the information about my hardware and system:
Driver Easy TXT Report
-------------------------------------------------------------------------
Binaries
-------------------------------------------------------------------------
Driver Easy version v5.6.15
Overview
-------------------------------------------------------------------------
Machine Gigabyte Technology Co., Ltd.
Operating System Microsoft Windows 10 Pro (64-bit)
Memory 8 GB
Processor Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Motherboard Gigabyte Technology Co., Ltd. - B75-D3V
Video Cards NVIDIA GeForce GTX 1060 6GB
Monitors ASUS VH222H
Hard Disk ST8000DM004-2CX188 (8.0 TB)
Network Card WAN Miniport (SSTP)
CPU
-------------------------------------------------------------------------
Processor
Name Intel Core i5 2500K
Code Name Sandy Bridge
TDP 95 W
Package Socket 1155 LGA
Technology 32 nm
Core Voltage 0.97 V
Specification Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Family 6
Model --
Stepping --
Ext. Family --
Ext. Model --
Revision D2
Instructions MMX , SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, x86-64, NX, VMX, AES, AVX
Clocks
Core Speed 1596.2 MHz
Multiplier x 16
Bus Speed 99.8 MHz
QPILink --
Cache
L1 Data 4 x 32 KBytes
L1 Inst 4 x 32 KBytes
Level 2 4 x 256 KBytes
Level3 6144 KBytes
Motherboard
-------------------------------------------------------------------------
Motherboard
Manufacturer Gigabyte Technology Co., Ltd.
Model B75-D3V x.x
Chipset Intel Sandy Bridge
Revision 09
Southbrige Intel P75/B75
Revision 04
LPCIO --
BIOS
Core Speed American Megatrends Inc.
Version F9
Date 10/23/2013
Graphic Interface
Version --
Transfer Rate --
Max. Supported --
Memory
-------------------------------------------------------------------------
General
Type DDR3
Size 8192 MBytes
Channel# --
DC Model --
NB Frequency --
Timings
DRAM Frequency 665.1 MHz
FSB
RAM --CAS# Latency(CL) 9 clocks
RAS# to CAS# Delay(tRCD) 9 clocks
RAS# Precharge(tRP) 9 clocks
Cycle Time(rRAS) 24 clocks
Bank Cycle Time(tRC) --
Command Rate(CR) 1 clocks
Graphics
-------------------------------------------------------------------------
GPU
Name NVIDIA GeForce GTX 1060 6GB
Code Name GP106
Technology 16 nm
Revision --
Clocks
Core 1544 MHz
Shader --
Memory 4006.8 MHz
Memory
Size 6144 MBytes
Type 8
Bus Width --
Device name DESKTOP-1TNAJT7
Processor Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz 3.70 GHz
Installed RAM 8.00 GB
Device ID E2AB6EB7-2C4E-4810-9673-5E3D1CC8DA76
Product ID 00330-80000-00000-AA827
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Pro
Version 20H2
Installed on 4/4/2021
OS build 19042.906
Experience Windows Feature Experience Pack 120.2212.551.0
How could I fix this problem, please? Since I updated the system and the drivers to the maximum, I feel like I am out of options. Could you give me an advice, how to proceed please? I would very much appreciate your help. Thank you and all the best, Juraj
Continue reading...