USB-A 3.0 to ethernet adapter stuck in USB 2 speed

  • Thread starter Thread starter Dylan_96
  • Start date Start date
D

Dylan_96

Guest
I bought this USB-A 3.0 to ethernet adapter, connected it to a usb 3 port, and as you can see from USB Device Tree Viewer it’s only working in usb 2.0 mode.But, if i use the “restart port” feature it’s then recognised correctly as USB 3, as you can see here.This only happens on windows 11, i tested many laptops and desktops some fully updated and some brand new, i also tried 2 different usb-a to ethernet adapters. Same issue on all of them.Every windows 10 pc recognised the adapter as USB 3 istantly.What could be the problem?

Continue reading...
 
You must log in or register to reply here.

Similar threads

S
The USB 3.0 asix 1gbit AX88179 ethernet network adapter is not working at full capacity (340mbits speed limit)
Replies
0
Views
4
sanjarbek sodikov
S
S
The USB 3.0 asix 1gbit AX88179 ethernet network adapter is not working at full capacity (340mbits speed limit)
Replies
0
Views
2
sanjarbek sodikov
S
J
Setting network adapter priority no longer works in Windows 11
Replies
0
Views
7
JimmyXYZ
J
S
USB 3 to Ethernet connectivity issue.
Replies
0
Views
5
Slavomir Slavchev
S
Y
USB Connected To USB 3.0 But Isn't Showing Up As Such
Replies
0
Views
6
Yug Mohan
Y
Back
Top