"Charlie+" wrote in message
news:1rd7u5tbecktqeq29m6q64jeikg0jiu8bj@4ax.com...
> On Thu, 06 May 2010 18:53:59 +0100, Charlie+ wrote as :
>
>>I am trying to do a recovery from the WINDOWS XPPro sp3 installation disk
>>due to a corrupted file stopping windows loading from HDisk. The problem
>>is
>>that this computer has never had an Administrator password set - the
>>request
>>comes for the Administrator password and if I just press return as you
>>would
>>expect for a blank password it refuses to accept the blank field. Is
>>there
>>a way round this or have I to do a full reinstall? I dont think I have an
>>image of this particular machine!
>>Charlie+
>
> Thanks to all who replied : I repeat - there is no Administrator password
> set (except a blank field), I did the XP Pro original installation so I
> know
> for certain and this is the first time I have ever had a problem (ie
> trying
> to use the recovery console), I have password resetter software anyway
> and
> that doesnt help because a blank password will not allow the recovery
> console to get through the request for password in the recovery console
> with
> a blank field. As I made clear in the OP this is for a Windows XP
> recovery
> not just to break into an already running system.
> Does anyone who really knows this quirk have an answer? I suppose
> positive
> password insertion rather than resetting would do the trick but as far as
> I
> know no such s/w exists! Thanks
> Charlie+
Charlie+...
As you have heard from a number of responders to your query it would appear
that somewhere/somehow the administrator's password had been previously set
in your system. I realize that you have indicated that you "know for
certain" that no administrator password has ever been set but it is hard to
escape the conclusion that such was the case.
In any event since you cannot access the Recovery Console without entering a
password that the RC is demanding, would it not be advisable to simply use a
program and reset the password to a blank or another password and thus
determine whether that resolves your problem?
You have also indicated you have "password resetter software" available. In
view of the difficulty you're experiencing, have you actually used it to
create a blank password or some other acceptable password? And if so, did
you run into the same password problem re accessing the RC?
The program we (and an untold number of XP users) have used over the years
to reset the administrator's password to a blank is the freely-available
Nordahl program that Pegasus, and I believe other responders have mentioned.
In case you want to try it, here are the details...
Access the following website:
http://pogostick.net/~pnh/ntpasswd/ and
download the freely available program that will allow you to create a
bootable CD that with which you will be able to reset your password.
Here are step-by-step instructions for using this program...
1. On the top of the webpage click on the "Bootdisk" button.
2. In the "Download" section toward the bottom of that page click on the
cd080802.zip file and download it to your Desktop. Note it's a ZIP file so
the contents of that file will have to be extracted.
3. I assume you know how to do this by merely right-clicking on the ZIP
file, click on Extract All, Next, Next, Finish.
4. A folder will be created on your Desktop titled "cd080802".
5. Inside that folder will be the cd080802.iso file. It's this .iso file
that allows you to create a bootable CD from that .iso image.
6. Hopefully, you have a CD-burning program, e.g., Nero, Roxio, etc., that
allows you to merely double-click on the .iso file and the program will open
and create a bootable CD from that .iso image. If you don't have such a
program perhaps you have a friend or acquaintance who does and he or she can
help you with creating the bootable CD. There are other programs available
on the net that allow you to do this as well - one popular program is the
freely-available ISO Recorder program - see
http://isorecorder.alexfeinman.com/isorecorder.htm
Now that you've created the bootable CD that's designed to reset your
password, insert the CD in your optical drive and boot to it.
The following are step-by-step instructions for using the program. The
example involved is a single-partitioned HDD, but the basic steps are the
same for any size HDD, except where the drive is multi-partitioned. If the
latter is the case the steps will be slightly different but they will not be
unduly complicated or substantially different under those circumstances.
As you progress through the screens the information provided and steps
involved may look more complicated than they really are. In virtually every
step during the process the user will simply be pressing the Enter key or
some other simple keystroke.
IMPORTANT NOTE: Case is important when responding to the prompts so ensure
you enter the correct lower or upper case.
1. Hopefully your PC is set up so that it will boot to a bootable CD. If
it's not, change the motherboard's BIOS boot priority setting so that the
CD-ROM is first in boot priority.
2. Boot to the password reset CD. At the first screen you will see the
"boot:" prompt.
Press Enter.
3. "Step ONE" is to select the drive on which the Windows OS is installed.
If the drive has been multi-partitioned all the partitions will be listed.
The prompt ("Step ONE") will be "Select: [1]".
Press Enter assuming "1" is the boot partition. Otherwise enter the correct
number of the partition containing boot system.
4. The next prompt ("Step TWO") will be "What is the path to the registry
directory? (relative to windows disk)
[WINDOWS/system32/config]:".
Once again, press Enter.
5. The next prompt will list a number of options of which "1" is "Password
reset...". Press Enter.
6. The next prompt at "Step THREE: Password or registry edit" will list
three options. The default prompt "[1]" will reflect the first option, "Edit
user data and passwords". Again, press Enter.
The next prompt will ask for the username listing the default
[Administrator]. Enter your username (ensuring that you enter the proper
case, e.g., CHARLIE), and press Enter.
The "User Edit Menu" will display listing various options. The first option
is to "Clear (blank) user password" so enter "1" at the prompt.
The confirmation "Password cleared!" message should appear.
7. At the next prompt enter "!" (exclamation mark) to quit the "User Edit
Menu". Press Enter.
8. At the next prompt enter "q" to quit the process.
9. At "Step FOUR" enter "y" to write changes. Press Enter.
10. At the "EDIT COMPLETE" message, press Enter to confirm ending the
process.
11. The "#" prompt will appear indicating termination of the process. Remove
the CD and reboot.
Hopefully your Administrator's password has been reset to a blank password
and you should gain access to the Recovery Console.
Anna