K
kemkoi
Guest
So 3 days ago I built my own computer and all. Everything worked fine, fans, no Leds shining or anything so I thought it was about time to get into my bios and change so the DVD was booting up first. After I'd done that I put my Windows 7 DVD (original DVD) in and run the installation.
The first time I tried to install it got stuck at copying files so it just stayed at 0% so I closed the installation and shutdown the computer.
Then I switched the SATA cable from the DVD to another slot and it said like "BOOT MGR is missing". So I changed back to the same slot and the installation could be booted again.
The second time I tried to install Windows 7 Ultimate 64 bit the copying files went to 100 % instantly and got stuck at expanding files so it just stayed at 0 %.
So I cancelled the installation one more time and shutdown the computer.
Now I was going to try a third thing. I tried to run the installation with only one RAM and it got to 100% on copying files instantly again and the installation went through the expanding files though it took a loooong time. Then it got to the last setup and Windows restarted. When it had booted up and anything I just waited for the installation to load up again and finish. But this time it just said Windows is Starting and it just stays like that nothing happens.
I put in the second ram and the same thing happened.
So I ran the windows installation again and formated the harddrive and reinstalled windows but still no luck, the same thing happends on the installation instantly 100 % at copying files and then rest of the installation is very very slow.
I've been trying to fix this for 3 days now NON STOP... I don't really get what the problem is... If it's any help to you the boot_device_led is shining red when I start the computer.
I've tried to install it and formate the harddrive and all kindof stuff but still... I can't get windows working, every single time it just instantly goes to 100 % on copying files and the rest of the installation goes slow and it never gets to the "Product Key Part"...
Here are the computer specs:
Chassi - Cooler Master Elite 310 Svart/Silver - - http://www.komplett....ku=485612#extra
Upgrade Package (CPU, Motherboard, RAM) : http://www.komplett....aspx?sku=649116
(Containing: Intel® Core™ i5-2500K Processor, Socket-LGA1155, Quad Core, 3.3Ghz, 6MB, 95W, Boxed w/fan, ASUS P8Z68-V PRO/GEN3, Socket-1155, ATX, Z68, DDR3, 3xPCIe(3.0)x16, CFX&SLI, SATA 6Gb/s,USB3.0,FW, VGA,DVI,HDMI, EFI and Kingston DDR3 HyperX 1600MHz 8GB, Kit w/2X HyperX 4GB DDR3, CL9-9-9-27, 240pin)
Graphic card - Sapphire Radeon HD 6770 1GB GDDR5 - - http://www.komplett....aspx?sku=657819
Power Supply - Chieftec A-85 Series CTB-650S 650W PSU - - http://www.komplett....aspx?sku=645493
Harddrive - Western Digital Caviar® Blue 500GB - - http://www.komplett....aspx?sku=620189
DVD - Sony Optiarc DVD±RW Writer, AD-5280S - - http://www.komplett....ku=645800#extra
Please help me...
Regards Kemkoi.
Continue reading...
The first time I tried to install it got stuck at copying files so it just stayed at 0% so I closed the installation and shutdown the computer.
Then I switched the SATA cable from the DVD to another slot and it said like "BOOT MGR is missing". So I changed back to the same slot and the installation could be booted again.
The second time I tried to install Windows 7 Ultimate 64 bit the copying files went to 100 % instantly and got stuck at expanding files so it just stayed at 0 %.
So I cancelled the installation one more time and shutdown the computer.
Now I was going to try a third thing. I tried to run the installation with only one RAM and it got to 100% on copying files instantly again and the installation went through the expanding files though it took a loooong time. Then it got to the last setup and Windows restarted. When it had booted up and anything I just waited for the installation to load up again and finish. But this time it just said Windows is Starting and it just stays like that nothing happens.
I put in the second ram and the same thing happened.
So I ran the windows installation again and formated the harddrive and reinstalled windows but still no luck, the same thing happends on the installation instantly 100 % at copying files and then rest of the installation is very very slow.
I've been trying to fix this for 3 days now NON STOP... I don't really get what the problem is... If it's any help to you the boot_device_led is shining red when I start the computer.
I've tried to install it and formate the harddrive and all kindof stuff but still... I can't get windows working, every single time it just instantly goes to 100 % on copying files and the rest of the installation goes slow and it never gets to the "Product Key Part"...
Here are the computer specs:
Chassi - Cooler Master Elite 310 Svart/Silver - - http://www.komplett....ku=485612#extra
Upgrade Package (CPU, Motherboard, RAM) : http://www.komplett....aspx?sku=649116
(Containing: Intel® Core™ i5-2500K Processor, Socket-LGA1155, Quad Core, 3.3Ghz, 6MB, 95W, Boxed w/fan, ASUS P8Z68-V PRO/GEN3, Socket-1155, ATX, Z68, DDR3, 3xPCIe(3.0)x16, CFX&SLI, SATA 6Gb/s,USB3.0,FW, VGA,DVI,HDMI, EFI and Kingston DDR3 HyperX 1600MHz 8GB, Kit w/2X HyperX 4GB DDR3, CL9-9-9-27, 240pin)
Graphic card - Sapphire Radeon HD 6770 1GB GDDR5 - - http://www.komplett....aspx?sku=657819
Power Supply - Chieftec A-85 Series CTB-650S 650W PSU - - http://www.komplett....aspx?sku=645493
Harddrive - Western Digital Caviar® Blue 500GB - - http://www.komplett....aspx?sku=620189
DVD - Sony Optiarc DVD±RW Writer, AD-5280S - - http://www.komplett....ku=645800#extra
Please help me...
Regards Kemkoi.
Continue reading...