PC won’t boot windows on start after installing additional ram.

[Microsoft Windows]

I recently added two additional Corsair DDR5 ram 6000 MHz to my PC. The PC was working perfectly before this. Upon power on the monitor recognizes that the PC was turned on, but no display is put out. On the motherboard, the orange DRAM light is lit up. I can enter bios and get a display by holding the power button 15 or so seconds on turn off, then powering up again. There are no error messages in bios. I can boot windows from bios, and windows is the only thing in the boot priorities. After booting from bios, the PC works perfectly with great performance and zero problems. The DRAM light is

Continue reading...