more on partitioning

  • Thread starter Thread starter spamlet
  • Start date Start date
S

spamlet

Guest
As a novice on drive swapping and the subject of partitions, I recently let

Acronis clone my 20 gig laptop (Dell Inspiron 2600) drive to a new 80gig one

automatically.



The old drive had an invisible 30meg odd partition in addition to the usual

C. I didn't know what the invisible partition was for, so I let Acronis

decide, and it resized both partitions proportionately onto the new drive.



Thus my new invisible drive is about 120meg.

Does it need to be?

What is it for?

Should I/is it possible to, reduce it to its original size, or does it

contain information (database/index?) which needs to grow in proportion as

more data gradually fills the main partition?



Thanks for any enlightenment.



S
 
As a novice on drive swapping and the subject of partitions, I recently let

Acronis clone my 20 gig laptop (Dell Inspiron 2600) drive to a new 80gig one

automatically.



The old drive had an invisible 30meg odd partition in addition to the usual

C. I didn't know what the invisible partition was for, so I let Acronis

decide, and it resized both partitions proportionately onto the new drive.



Thus my new invisible drive is about 120meg.

Does it need to be?

What is it for?

Should I/is it possible to, reduce it to its original size, or does it

contain information (database/index?) which needs to grow in proportion as

more data gradually fills the main partition?



Thanks for any enlightenment.



S
 
spamlet wrote:

> As a novice on drive swapping and the subject of partitions, I

> recently let Acronis clone my 20 gig laptop (Dell Inspiron 2600)

> drive to a new 80gig one automatically.

>

> The old drive had an invisible 30meg odd partition in addition to the

> usual C. I didn't know what the invisible partition was for, so I

> let Acronis decide, and it resized both partitions proportionately

> onto the new drive.

> Thus my new invisible drive is about 120meg.

> Does it need to be?



No. It needs to be the size of what was cloned, maybe less - much less - if

the clone is compressed.



> What is it for?



The invisible drive is - probably - a recovery partition put there by Dell.



--



dadiOH

____________________________



dadiOH's dandies v3.06...

....a help file of info about MP3s, recording from

LP/cassette and tips & tricks on this and that.

Get it at http://mysite.verizon.net/xico
 
spamlet wrote:

> As a novice on drive swapping and the subject of partitions, I

> recently let Acronis clone my 20 gig laptop (Dell Inspiron 2600)

> drive to a new 80gig one automatically.

>

> The old drive had an invisible 30meg odd partition in addition to the

> usual C. I didn't know what the invisible partition was for, so I

> let Acronis decide, and it resized both partitions proportionately

> onto the new drive.

> Thus my new invisible drive is about 120meg.

> Does it need to be?



No. It needs to be the size of what was cloned, maybe less - much less - if

the clone is compressed.



> What is it for?



The invisible drive is - probably - a recovery partition put there by Dell.



--



dadiOH

____________________________



dadiOH's dandies v3.06...

....a help file of info about MP3s, recording from

LP/cassette and tips & tricks on this and that.

Get it at http://mysite.verizon.net/xico
 
"spamlet" wrote in message

news:ePshRnlBLHA.4308@TK2MSFTNGP04.phx.gbl...

> As a novice on drive swapping and the subject of partitions, I recently

> let Acronis clone my 20 gig laptop (Dell Inspiron 2600) drive to a new

> 80gig one automatically.

>

> The old drive had an invisible 30meg odd partition in addition to the

> usual C. I didn't know what the invisible partition was for, so I let

> Acronis decide, and it resized both partitions proportionately onto the

> new drive.

>

> Thus my new invisible drive is about 120meg.

> Does it need to be?

> What is it for?

> Should I/is it possible to, reduce it to its original size, or does it

> contain information (database/index?) which needs to grow in proportion as

> more data gradually fills the main partition?

>

> Thanks for any enlightenment.

>

> S

>





Most of the Dells I've worked on had an EISA partition @ the start of the

drive. As you noted they are around 30 MB. The partition contains the files

needed to run Dell's hardware diagnostic programs when you first boot the

computer. You need to hit one of the F keys, F12 I think, when the computer

first starts and it will boot from that partition and allow you to run the

diagnostic programs. IIRC the partition doesn't show up in My Computer but

is visible through Disk Management. The same diagnostics can be run from one

of the CDs that are included with your computer. Look for a CD named

Resources or Drivers for this feature.



It won't get any larger since nothing is written or saved to the partition.

I suppose you could resize it if you're desperate for space. If you've got

the CDs you could delete it entirely. Most of the time when I've had to

rebuild a Dell I've deleted that partition and made the whole drive C. In

your case I'd just leave it be and not worry about it. As long as you're

computer is working OK why mess with success.



If you're curious do a Google search for Dell diagnostic partition for more

info. Here's one link to get you started.



http://support.dell.com/support/top...&s=dhs&docid=A9E3A15597A04AFBB02EE16785D39C5C



Good luck



Nepatsfan
 
"spamlet" wrote in message

news:ePshRnlBLHA.4308@TK2MSFTNGP04.phx.gbl...

> As a novice on drive swapping and the subject of partitions, I recently

> let Acronis clone my 20 gig laptop (Dell Inspiron 2600) drive to a new

> 80gig one automatically.

>

> The old drive had an invisible 30meg odd partition in addition to the

> usual C. I didn't know what the invisible partition was for, so I let

> Acronis decide, and it resized both partitions proportionately onto the

> new drive.

>

> Thus my new invisible drive is about 120meg.

> Does it need to be?

> What is it for?

> Should I/is it possible to, reduce it to its original size, or does it

> contain information (database/index?) which needs to grow in proportion as

> more data gradually fills the main partition?

>

> Thanks for any enlightenment.

>

> S

>





Most of the Dells I've worked on had an EISA partition @ the start of the

drive. As you noted they are around 30 MB. The partition contains the files

needed to run Dell's hardware diagnostic programs when you first boot the

computer. You need to hit one of the F keys, F12 I think, when the computer

first starts and it will boot from that partition and allow you to run the

diagnostic programs. IIRC the partition doesn't show up in My Computer but

is visible through Disk Management. The same diagnostics can be run from one

of the CDs that are included with your computer. Look for a CD named

Resources or Drivers for this feature.



It won't get any larger since nothing is written or saved to the partition.

I suppose you could resize it if you're desperate for space. If you've got

the CDs you could delete it entirely. Most of the time when I've had to

rebuild a Dell I've deleted that partition and made the whole drive C. In

your case I'd just leave it be and not worry about it. As long as you're

computer is working OK why mess with success.



If you're curious do a Google search for Dell diagnostic partition for more

info. Here's one link to get you started.



http://support.dell.com/support/top...&s=dhs&docid=A9E3A15597A04AFBB02EE16785D39C5C



Good luck



Nepatsfan
 
"Nepatsfan" wrote in message

news:eljg08mBLHA.1972@TK2MSFTNGP02.phx.gbl...

> "spamlet" wrote in message

> news:ePshRnlBLHA.4308@TK2MSFTNGP04.phx.gbl...

>> As a novice on drive swapping and the subject of partitions, I recently

>> let Acronis clone my 20 gig laptop (Dell Inspiron 2600) drive to a new

>> 80gig one automatically.

>>

>> The old drive had an invisible 30meg odd partition in addition to the

>> usual C. I didn't know what the invisible partition was for, so I let

>> Acronis decide, and it resized both partitions proportionately onto the

>> new drive.

>>

>> Thus my new invisible drive is about 120meg.

>> Does it need to be?

>> What is it for?

>> Should I/is it possible to, reduce it to its original size, or does it

>> contain information (database/index?) which needs to grow in proportion

>> as more data gradually fills the main partition?

>>

>> Thanks for any enlightenment.

>>

>> S

>>

>

>

> Most of the Dells I've worked on had an EISA partition @ the start of the

> drive. As you noted they are around 30 MB. The partition contains the

> files needed to run Dell's hardware diagnostic programs when you first

> boot the computer. You need to hit one of the F keys, F12 I think, when

> the computer first starts and it will boot from that partition and allow

> you to run the diagnostic programs. IIRC the partition doesn't show up in

> My Computer but is visible through Disk Management. The same diagnostics

> can be run from one of the CDs that are included with your computer. Look

> for a CD named Resources or Drivers for this feature.

>

> It won't get any larger since nothing is written or saved to the

> partition. I suppose you could resize it if you're desperate for space. If

> you've got the CDs you could delete it entirely. Most of the time when

> I've had to rebuild a Dell I've deleted that partition and made the whole

> drive C. In your case I'd just leave it be and not worry about it. As long

> as you're computer is working OK why mess with success.

>

> If you're curious do a Google search for Dell diagnostic partition for

> more info. Here's one link to get you started.

>

> http://support.dell.com/support/top...&s=dhs&docid=A9E3A15597A04AFBB02EE16785D39C5C

>

> Good luck

>

> Nepatsfan

>



Thanks Nepatsfan (Where have I heard that name before?),



When I reboot and hit the F12, the thing seems to go on line and look for a

mac number it can't find. It does pause and say to press ctrl alt something

but moves on to search on line before I can press anything.



Cheers,



S
 
"Nepatsfan" wrote in message

news:eljg08mBLHA.1972@TK2MSFTNGP02.phx.gbl...

> "spamlet" wrote in message

> news:ePshRnlBLHA.4308@TK2MSFTNGP04.phx.gbl...

>> As a novice on drive swapping and the subject of partitions, I recently

>> let Acronis clone my 20 gig laptop (Dell Inspiron 2600) drive to a new

>> 80gig one automatically.

>>

>> The old drive had an invisible 30meg odd partition in addition to the

>> usual C. I didn't know what the invisible partition was for, so I let

>> Acronis decide, and it resized both partitions proportionately onto the

>> new drive.

>>

>> Thus my new invisible drive is about 120meg.

>> Does it need to be?

>> What is it for?

>> Should I/is it possible to, reduce it to its original size, or does it

>> contain information (database/index?) which needs to grow in proportion

>> as more data gradually fills the main partition?

>>

>> Thanks for any enlightenment.

>>

>> S

>>

>

>

> Most of the Dells I've worked on had an EISA partition @ the start of the

> drive. As you noted they are around 30 MB. The partition contains the

> files needed to run Dell's hardware diagnostic programs when you first

> boot the computer. You need to hit one of the F keys, F12 I think, when

> the computer first starts and it will boot from that partition and allow

> you to run the diagnostic programs. IIRC the partition doesn't show up in

> My Computer but is visible through Disk Management. The same diagnostics

> can be run from one of the CDs that are included with your computer. Look

> for a CD named Resources or Drivers for this feature.

>

> It won't get any larger since nothing is written or saved to the

> partition. I suppose you could resize it if you're desperate for space. If

> you've got the CDs you could delete it entirely. Most of the time when

> I've had to rebuild a Dell I've deleted that partition and made the whole

> drive C. In your case I'd just leave it be and not worry about it. As long

> as you're computer is working OK why mess with success.

>

> If you're curious do a Google search for Dell diagnostic partition for

> more info. Here's one link to get you started.

>

> http://support.dell.com/support/top...&s=dhs&docid=A9E3A15597A04AFBB02EE16785D39C5C

>

> Good luck

>

> Nepatsfan

>



Thanks Nepatsfan (Where have I heard that name before?),



When I reboot and hit the F12, the thing seems to go on line and look for a

mac number it can't find. It does pause and say to press ctrl alt something

but moves on to search on line before I can press anything.



Cheers,



S
 
You must log in or register to reply here.

Similar threads

Windows 10
How do I clone my Windows 10 installation from a larger HDD to a smaller SSD?
Replies
0
Views
4
Windows 10
Windows 10
W
Deleted Windows 11 Partition on Another Drive, but my Boot Drive Won't Load Now.
Replies
0
Views
20
WubzyGD
W
W
Deleted Windows 11 Partition on Another Drive, but my Boot Drive Won't Load Now.
Replies
0
Views
11
WubzyGD
W
M
Cloned PC HD to SSD now Error code 0xc0000225 on Windows 11
Replies
0
Views
8
M A Weiss
M
M
Cloned PC HD to SSD now Error code 0xc0000225 on Windows 11
Replies
0
Views
15
M A Weiss
M
Back
Top