F
fiazmir
Guest
Hi.
I am Fiaz.
I have an odd issue on a new install of win 10 Pro on a brand new new system.
Fail to make a successful install to the new kit. Can see the USB key and start the install process.
Mainly fails after showing the blue windows logs on screen.
Got to the install screens (at least 6 times) and set the lang to start then failed to install - just rebooted so not specific error message.
Purchased all the parts separate and am making a rig myself.
Woking off the HCL of each manufacturer so know it should work.
No overclocking done.
I have had 3 day attempting to install with various configs.
Altering the boot media (USB 2/3.2 , different USB keys, different USB ports, DVD)
Can seen the USB key in BIOS and UEIF.
Different BIOS settings and the default used.
BIOS updated mainly around setting the UEFI on /off and the on board graphics reduced resolution from the 4K to 1204x800.
Still fail to get a full install - can get the windows booing but at install time the process fails.
Have:
win 10 pro (OEM) - to install do new install
AMD Ryzen 7 PRO 4750G R7 PRO 4750G 3.6 GHz Eight-Core
Gigabyte B550 AORUS ELITE ATX Motherboard for AMD AM4 CPUs Version 1.
Ballistix DDR4, DRAM, Gaming Memory Kit, 16GB(8GB X2), CL16. BL2K8G36C16U4B
Samsung SM951 512GB M.2 PCI-e 3.0 x 4 NVMe Solid State Drive MZVPV512HDGL-00000
Samsung 860 EVO 1TB,Internal,2.5 inch (V-NAND SSD) Solid State Drive
Fractal Design Celsius S24 AIO Water Cooler cpu
Coolmaster Stryker case
Gigabyte Odin 1200W P/S
Using on board DP port (Vega graphics) enabled on BIOS settings. (that the CPUs 4750G does)
No graphics card installed (currently)
DELL 4K screen via DP port
The BIOS is updated to the latest version.
All overclocking is off.
All POST test are OK. Can see the BIOS with DEL key.
Have run through and set up for UEFI boot only. Legacy only and auto options to attempt fresh install.
Used DVD and USB (MS iso image tool and Rufus) on two different USB keys (one USB 2 @ 25G and a USB 3.2 @ 500G)
Also tried to install Centos and failed as a test.
Where I got furthest install was:
BIOS settings to force 1280x800 graphics
25G USB key with manual build of UEFI key in PCs USB 2 port for boot/install.
manual Win 10pro copy from DVD.
I have had the Win install screen up an running but failed with
cannot access the C:\Sources\install.esd file.
Dropped down in to the CMD line and checked its there - was in dir sources (I though capitals and not capitals did not matter in Win)
So strange error to fail with.
Continue reading...
I am Fiaz.
I have an odd issue on a new install of win 10 Pro on a brand new new system.
Fail to make a successful install to the new kit. Can see the USB key and start the install process.
Mainly fails after showing the blue windows logs on screen.
Got to the install screens (at least 6 times) and set the lang to start then failed to install - just rebooted so not specific error message.
Purchased all the parts separate and am making a rig myself.
Woking off the HCL of each manufacturer so know it should work.
No overclocking done.
I have had 3 day attempting to install with various configs.
Altering the boot media (USB 2/3.2 , different USB keys, different USB ports, DVD)
Can seen the USB key in BIOS and UEIF.
Different BIOS settings and the default used.
BIOS updated mainly around setting the UEFI on /off and the on board graphics reduced resolution from the 4K to 1204x800.
Still fail to get a full install - can get the windows booing but at install time the process fails.
Have:
win 10 pro (OEM) - to install do new install
AMD Ryzen 7 PRO 4750G R7 PRO 4750G 3.6 GHz Eight-Core
Gigabyte B550 AORUS ELITE ATX Motherboard for AMD AM4 CPUs Version 1.
Ballistix DDR4, DRAM, Gaming Memory Kit, 16GB(8GB X2), CL16. BL2K8G36C16U4B
Samsung SM951 512GB M.2 PCI-e 3.0 x 4 NVMe Solid State Drive MZVPV512HDGL-00000
Samsung 860 EVO 1TB,Internal,2.5 inch (V-NAND SSD) Solid State Drive
Fractal Design Celsius S24 AIO Water Cooler cpu
Coolmaster Stryker case
Gigabyte Odin 1200W P/S
Using on board DP port (Vega graphics) enabled on BIOS settings. (that the CPUs 4750G does)
No graphics card installed (currently)
DELL 4K screen via DP port
The BIOS is updated to the latest version.
All overclocking is off.
All POST test are OK. Can see the BIOS with DEL key.
Have run through and set up for UEFI boot only. Legacy only and auto options to attempt fresh install.
Used DVD and USB (MS iso image tool and Rufus) on two different USB keys (one USB 2 @ 25G and a USB 3.2 @ 500G)
Also tried to install Centos and failed as a test.
Where I got furthest install was:
BIOS settings to force 1280x800 graphics
25G USB key with manual build of UEFI key in PCs USB 2 port for boot/install.
manual Win 10pro copy from DVD.
I have had the Win install screen up an running but failed with
cannot access the C:\Sources\install.esd file.
Dropped down in to the CMD line and checked its there - was in dir sources (I though capitals and not capitals did not matter in Win)
So strange error to fail with.
Continue reading...