I'm confused about upgrades

  • Thread starter Thread starter blacksmith@none.com
  • Start date Start date
B

blacksmith@none.com

Guest
I'm confused about upgrades.



If I have an original XP CD (or for any other MS OS).

So I have the original XP install CD. The first one released.

So, lets say I want to upgrade it to the latest (I think it's SP3).

Do I need to first upgrade to SP2, then go to SP3, or can I just do

ONE upgrade to cover everything?



I'm asking this for a few reasons.



1. The only install CD I have is the ORIGINAL XP-Pro. I abandoned the

old computer because of bad motherboard capacitors. (I did save the

drives, memory, and case). I bought a new (used) computer complete

except monitor and hard drive. I'm using my old monitor and got a new

larger HD. Now I plan to install XP on it, using that original XP CD,

and then upgrade it. (I hope MS will allow the activation, since the

old computer is history).



2. Before MS stops supporting XP, I want to save ALL upgrades needed

onto a CD, and I need to know what to download.



3. I know MS is abandoning Win2000 soon or already did (not sure). My

old laptop cant run XP. It was made for Win98, but runs Win2K. In

case I have a drive failure, I may want to reinstall Win2K. I want

to save the entire upgrade package for Win2K on a CD, before it's gone

from the MS site. I know Win2K had several major upgrades and many

minor ones. There again, do I just need the LATEST, or do I need to

get all the inbetween ones too.



I just never understood how this works. In other words, does the

LATEST upgrade include all the upgrades (over the years), or do I need

to download every upgrade separetly? (for Win2K and/or XP).



Thanks
 
You're confusing upgrading with updating.



HOW TO get a computer running WinXP Gold (no Service Packs) fully patched

(after a clean install)

http://groups.google.com/group/microsoft.public.windowsupdate/msg/3f5afa8ed33e121c



HOW TO get a computer running WinXP SP1(a) or SP2 fully patched (after a

clean install)

http://groups.google.com/group/microsoft.public.windowsxp.general/msg/a066ae41add7dd2b





blacksmith@none.com wrote:

> I'm confused about upgrades.

>

> If I have an original XP CD (or for any other MS OS).

> So I have the original XP install CD. The first one released.

> So, lets say I want to upgrade it to the latest (I think it's SP3).

> Do I need to first upgrade to SP2, then go to SP3, or can I just do

> ONE upgrade to cover everything?

>

> I'm asking this for a few reasons.

>

> 1. The only install CD I have is the ORIGINAL XP-Pro. I abandoned the

> old computer because of bad motherboard capacitors. (I did save the

> drives, memory, and case). I bought a new (used) computer complete

> except monitor and hard drive. I'm using my old monitor and got a new

> larger HD. Now I plan to install XP on it, using that original XP CD,

> and then upgrade it. (I hope MS will allow the activation, since the

> old computer is history).

>

> 2. Before MS stops supporting XP, I want to save ALL upgrades needed

> onto a CD, and I need to know what to download.

>

> 3. I know MS is abandoning Win2000 soon or already did (not sure). My

> old laptop cant run XP. It was made for Win98, but runs Win2K. In

> case I have a drive failure, I may want to reinstall Win2K. I want

> to save the entire upgrade package for Win2K on a CD, before it's gone

> from the MS site. I know Win2K had several major upgrades and many

> minor ones. There again, do I just need the LATEST, or do I need to

> get all the inbetween ones too.

>

> I just never understood how this works. In other words, does the

> LATEST upgrade include all the upgrades (over the years), or do I need

> to download every upgrade separetly? (for Win2K and/or XP).

>

> Thanks
 
On Jun 5, 2:49 am, blacksm...@none.com wrote:

> I'm confused about upgrades.

>

> If I have an original XP CD (or for any other MS OS).  

> So I have the original XP install CD.  The first one released.

> So, lets say I want to upgrade it to the latest (I think it's SP3).

> Do I need to first upgrade to SP2, then go to SP3, or can I just do

> ONE upgrade to cover everything?

>

> I'm asking this for a few reasons.  

>

> 1. The only install CD I have is the ORIGINAL XP-Pro.  I abandoned the

> old computer because of bad motherboard capacitors. (I did save the

> drives, memory, and case).  I bought a new (used) computer complete

> except monitor and hard drive.  I'm using my old monitor and got a new

> larger HD.  Now I plan to install XP on it, using that original XP CD,

> and then upgrade it.  (I hope MS will allow the activation, since the

> old computer is history).

>

> 2. Before MS stops supporting XP, I want to save ALL upgrades needed

> onto a CD, and I need to know what to download.

>

> 3. I know MS is abandoning Win2000 soon or already did (not sure).  My

> old laptop cant run XP.  It was made for Win98, but runs Win2K. In

> case I have a drive failure, I may want to reinstall Win2K.   I want

> to save the entire upgrade package for Win2K on a CD, before it's gone

> from the MS site.  I know Win2K had several major upgrades and many

> minor ones.  There again, do I just need the LATEST, or do I need to

> get all the inbetween ones too.  

>

> I just never understood how this works.  In other words, does the

> LATEST upgrade include all the upgrades (over the years), or do I need

> to download every upgrade separetly? (for Win2K and/or XP).

>

> Thanks




Once you have SP3 installed, use a disk imaging program and save the

images to a 2nd drive.



Then you won't have to ever go through this again.



Good luck,

Andy
 
Back
Top