M
MarcAyoub
Guest
Hello everybody!
I'm really sorry to bother you with my problem but I've tried to do many things and nothing worked
I'm trying to upgrade my PC from windows 8 to windows 10.
I get this error :
0x8007001F-0x20006, The installation failed in the SAFE_OS phase with an error during REPLICATE_OC operation
What I've tried to fix the error so far :
- Uninstalled Antivirus
- Perform clean boot
- Renaming Catroot2
- Disabling all the drivers + windows firewall + windows defender
- Running SFC / scanow and restore health
- Running windows update troubleshooter
- Creating an Iso file and installing windows 10 from the Iso file.
- Deleting $WINDOWS.~BT
- I have more than 60gb of free space on C:\
I think I've done almost everything...
Here is my disk management system :
In $WINDOWS.~BT this is my setuperr log :
2020-03-31 16:48:47, Error SP CSetupPlatformOSSwitchCheckpoint::Rollback: Failed to read the rollback GUID from file: C:\$WINDOWS.~BT\Sources\Rollback\rollbackinfo.ini. Error: 0x00000002[gle=0x00000002]
AND setupact.log :
Continue reading...
I'm really sorry to bother you with my problem but I've tried to do many things and nothing worked
I'm trying to upgrade my PC from windows 8 to windows 10.
I get this error :
0x8007001F-0x20006, The installation failed in the SAFE_OS phase with an error during REPLICATE_OC operation
What I've tried to fix the error so far :
- Uninstalled Antivirus
- Perform clean boot
- Renaming Catroot2
- Disabling all the drivers + windows firewall + windows defender
- Running SFC / scanow and restore health
- Running windows update troubleshooter
- Creating an Iso file and installing windows 10 from the Iso file.
- Deleting $WINDOWS.~BT
- I have more than 60gb of free space on C:\
I think I've done almost everything...
Here is my disk management system :
In $WINDOWS.~BT this is my setuperr log :
2020-03-31 16:48:47, Error SP CSetupPlatformOSSwitchCheckpoint::Rollback: Failed to read the rollback GUID from file: C:\$WINDOWS.~BT\Sources\Rollback\rollbackinfo.ini. Error: 0x00000002[gle=0x00000002]
AND setupact.log :
2020-03-31 16:51:42, Info SP Current result: 0x8007001F
2020-03-31 16:51:42, Warning SP Bootstat.dat file: C:\$WINDOWS.~BT\Sources\Rollback\BootStat\OS\bootstat.dat does not exist
2020-03-31 16:51:42, Info SP Attempt to get BsdSummarize Diagnostic Information for bootstat file: C:\$WINDOWS.~BT\Sources\Rollback\WinPE\bootstat.dat
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: BootLogInitCount:2
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: BootLogOsLaunchCount:2
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: BootLogErrorCount:2
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: BootLogLastErrorEventCode:80
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: BootLogLastBootdiagErrorCode:0
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: HeaderPresent:1
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: BootId:2
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: LastBootSucceeded:1
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: FatalErrorCode:0
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: FatalErrorStatus:0
2020-03-31 16:51:42, Info SP BsdSummarize Diagnostic Information: ShutdownDeviceType:0
2020-03-31 16:51:42, Warning SP Bootstat.dat file: C:\$WINDOWS.~BT\Sources\Rollback\BootStat\PCAT\bootstat.dat does not exist
2020-03-31 16:51:42, Warning SP Bootstat.dat file: C:\$WINDOWS.~BT\Sources\Rollback\BootStat\EFI\bootstat.dat does not exist
2020-03-31 16:51:42, Info Set Watson bucketing parameter #3 to 1
2020-03-31 16:51:42, Info SP Rollback-Online-Common completed successfully.
2020-03-31 16:51:42, Info SP SPCleanupAfterRollback: Cleaning up C:\$WINDOWS.~BT
2020-03-31 16:51:42, Info SPCleanupInstallationDrive: Cleaning up C:\
2020-03-31 16:51:52, Info SP SetupPlatfrom: Executing Execute.RollbackOnlineUser commands
2020-03-31 16:51:52, Info SP ExecuteCommandFromValue: Executing command line: \$WINDOWS.~BT\Sources\SetupHost.exe /RollbackUser /Media /ClientId Media360 /ReportId 8343c4d7-5081-4dad-a838-ec9ba6ff7a9a
2020-03-31 16:51:52, Info MOUPG *************** SetupHost Logging Begin ***************
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: ModulePath = [C:\$WINDOWS.~BT\Sources]
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: WorkingPath = [C:\$WINDOWS.~BT\Sources]
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: LoggingPath = [C:\$Windows.~BT\Sources\Rollback]
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: MediaPath = []
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: InstallFilePath = []
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: ActionListFilePath = []
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: CmdLine = [/RollbackUser /Media /ClientId Media360 /ReportId 8343c4d7-5081-4dad-a838-ec9ba6ff7a9a]
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: Mode = [0xA]
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: Scenario = [0x1]
2020-03-31 16:51:52, Info MOUPG SetupHost::Initialize: Flags = [0x800]
2020-03-31 16:51:52, Info MOUPG SetupHost: Setup build version is: 10.0.18362.590 (19h1_release_svc_prod1.191209-1753)
2020-03-31 16:51:52, Info CONX pGetHostCSDBuildNumber: 'HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDBuildNumber' does not exist. Assume 0
2020-03-31 16:51:52, Info CONX Host OS version: 6.3.9600.0 (0.0) Platform 0x2, SuiteMask 0x300, ProdType 0x1
2020-03-31 16:51:52, Info CONX Source OS: Host SKU Info: Edition = 'CoreSingleLanguage', Edition Type = 'Client', Installation Type = 'Complete', Product Name = 'Windows 8.1 Single Language', Arch = amd64, StationType = Client Workstation, Stage type = Staged Image
2020-03-31 16:51:52, Info MOUPG Host OS License State [ Genuine ]
2020-03-31 16:51:52, Info MOUPG Host OS Architecture [ x64 ]
2020-03-31 16:51:52, Info MOUPG Host OS Language Id [ 1033 ]
2020-03-31 16:51:52, Info MOUPG User UI Language Id [ 1033 ]
2020-03-31 16:51:52, Info MOUPG Host OS Edition [ CoreSingleLanguage ]
2020-03-31 16:51:52, Info MOUPG Host OS Version [ 6.3.9600 ]
2020-03-31 16:51:52, Info MOUPG Host OS Build String [ 9600.19665.amd64fre.winblue_ltsb.200225-0600 ]
2020-03-31 16:51:52, Info MOUPG SetupHost: Creating setup mutex...
2020-03-31 16:51:52, Info MOUPG SetupHost::InitializeComponents
2020-03-31 16:51:52, Info MOUPG SetupHost: Loading ID: [c7b6e4de-b741-42d8-ac05-16738c9e0bc5] from [C:\$WINDOWS.~BT\Sources\MediaSetupUIMgr.dll]...
2020-03-31 16:51:53, Info MOUPG SetupHost: Loading complete.
2020-03-31 16:51:53, Info MOUPG CInstallUI::Initialize
2020-03-31 16:51:53, Info MOUPG SetupHost: Loading ID: [3d3ad714-f8d8-4c84-ad5f-10938c2f3339] from [C:\$WINDOWS.~BT\Sources\SetupCore.dll]...
2020-03-31 16:51:53, Info MOUPG SetupHost: Loading complete.
2020-03-31 16:51:53, Info MOUPG SetupHost: Loading ID: [c7b6e4de-b741-42d8-ac05-16738c9e0bc5] from [C:\$WINDOWS.~BT\Sources\SetupMgr.dll]...
2020-03-31 16:51:53, Info MOUPG SetupHost: Loading complete.
2020-03-31 16:51:53, Info MOUPG SetupManager::Initialize: WorkingPath = [C:\$WINDOWS.~BT\Sources]
2020-03-31 16:51:53, Info MOUPG SetupManager::Initialize: MediaPath = []
2020-03-31 16:51:53, Info MOUPG SetupManager::Initialize: InstallFilePath = []
2020-03-31 16:51:53, Info MOUPG SetupManager::Initialize: ActionListFilePath = []
2020-03-31 16:51:53, Info MOUPG SetupManager::Initialize: Mode = [0xA]
2020-03-31 16:51:53, Info MOUPG SetupManager::Initialize: Scenario = [0x1]
2020-03-31 16:51:53, Info MOUPG SetupManager::Initialize: Flags = [0x800]
2020-03-31 16:51:53, Info MOUPG SetupManager: Working Directory: [C:\$WINDOWS.~BT\Sources]
2020-03-31 16:51:53, Info MOUPG SetupManager: Local Media Path: [C:\$WINDOWS.~BT]
2020-03-31 16:51:53, Info MOUPG SetupManager: Scratch Path: [C:\$WINDOWS.~BT\Sources\Panther]
2020-03-31 16:51:53, Info MOUPG SetupManager: ESD Download Path: []
2020-03-31 16:51:53, Info MOUPG SetupManager: Media Path: []
2020-03-31 16:51:53, Info MOUPG SetupManager: Drivers Path: [C:\$WINDOWS.~BT\Drivers]
2020-03-31 16:51:53, Info MOUPG SetupManager: LangPacks Path: [C:\$WINDOWS.~BT\LangPacks]
2020-03-31 16:51:53, Info MOUPG SetupCore::Initialize
2020-03-31 16:51:53, Info MOUPG SetupCore::RegisterSetupActions
2020-03-31 16:51:53, Info MOUPG SetupCore: Registered IMAGE_EXIT action
2020-03-31 16:51:53, Info MOUPG DlpMgrInit: WorkingPath = [C:\$WINDOWS.~BT\Sources\Panther], Disposition = [Open], Flags = [0x6], Diagnostics = [Yes], StockRegistrar = [Yes], UserRegistrar = [Yes]
2020-03-31 16:51:54, Info MOUPG SetupManager: Region detected [LB]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [1], Value = [9]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [2], Value = [1]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [4], Value = [10]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [17], Value = [132301399140193417]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [9], Value = [0]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [15], Value = [2c774ce8-d078-420b-9b1d-7c3470547d2f]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [13], Value = [0]
2020-03-31 16:51:54, Info MOUPG SetupManager: WebSetup data file not found
2020-03-31 16:51:54, Info MOUPG SetupManager: DiagnosticPrompt Disabled via detection.
2020-03-31 16:51:54, Info MOUPG SetupManager: PartitionResize Enabled by default.
2020-03-31 16:51:54, Info MOUPG SetupManager: Target Drive Letter set to [C] via default.
2020-03-31 16:51:54, Info MOUPG SetupManager: DU Channels Flag -> [0x3]
2020-03-31 16:51:54, Info MOUPG SetupManager: DU Categories Flag -> [0x3F]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [16], Value = [0]
2020-03-31 16:51:54, Info MOUPG SetupHost::Execute
2020-03-31 16:51:54, Info MOUPG Setup StudyID was [not found]
2020-03-31 16:51:54, Info MOUPG A previous StudyID was [not restored]
2020-03-31 16:51:54, Info MOUPG SetupManager: Reporting Data - DataId = [22], Value = [0]
2020-03-31 16:51:54, Info MOUPG SetupManager: User Rollback Mode Detected
2020-03-31 16:51:54, Info MOUPG SetupHost: Reporting post reboot event -> [0x8007001F, 0x20006]
2020-03-31 16:51:54, Warning MOUPG SetupNotify::ReportEvent - Report ID or Event Reporter not available.
2020-03-31 16:51:54, Info MOUPG SetupHost: Tracing post reboot failure event
2020-03-31 16:51:54, Info MOUPG CSetupDiagnostics: Tracing Data [CUSTOM] -> [WindowsUpdateFailure] -> [Media360][d7a5e3f0-4d32-4770-bba3-8410adbcf2ce][8343c4d7-5081-4dad-a838-ec9ba6ff7a9a][][0x1]
2020-03-31 16:51:54, Info MOUPG CSetupUIManager: Rollback Error [0x8007001F] - Showing rollback message
2020-03-31 16:51:54, Info MOUPG CInstallUI::ShowRollbackMsg: Posted MSG_INSTALLUI_SHOW_ROLLBACK_PAGE
2020-03-31 16:51:54, Info MOUPG CInstallUI::CInstallUIMessageWindow::ShowRollbackPage
2020-03-31 16:51:54, Info MOUPG CInstallUI::ShowRollbackPage
2020-03-31 16:55:56, Info MOUPG CSetupUIManager: Showing exiting Setup
2020-03-31 16:55:56, Info MOUPG CInstallUI::Quit: Posted MSG_INSTALLUI_FORCE_QUIT
2020-03-31 16:55:56, Info MOUPG CInstallUI::CInstallUIMessageWindow::ForceQuit
2020-03-31 16:55:56, Info MOUPG Force ending Message pump
2020-03-31 16:55:56, Info MOUPG CInstallUI::ExitInstance
2020-03-31 16:55:56, Info MOUPG **************** SetupHost Logging End ****************
2020-03-31 16:55:56, Info SP ExecuteCommandFromValue: Command line returned result: 0x00000000
2020-03-31 16:55:56, Info SP Attempting to stop the telemetry
2020-03-31 16:55:56, Info SP Stop telemetry. Process id: 3312
2020-03-31 16:55:59, Info SP Created telemetry file C:\$WINDOWS.~BT\Sources\Panther\RbTel-Merge1.etl successfully.
2020-03-31 16:55:59, Info Copy telemetry file: source folder: C:\$WINDOWS.~BT\Sources\Panther, destination folder: C:\ProgramData\Microsoft\Diagnosis\ETLLogs
2020-03-31 16:55:59, Info Copy etl files: source: C:\$WINDOWS.~BT\Sources\Panther\DlTel-Merge.etl, destination: C:\ProgramData\Microsoft\Diagnosis\ETLLogs\DlTel-Merge.etl
2020-03-31 16:55:59, Info pCopyTelemetryFile: Wrote CV abK4cXKUAECOKPZl to ETL C:\ProgramData\Microsoft\Diagnosis\ETLLogs\DlTel-Merge.etl:$ETLUNIQUECVDATA
2020-03-31 16:55:59, Info Copy etl files: source: C:\$WINDOWS.~BT\Sources\Panther\RbTel-Merge.etl, destination: C:\ProgramData\Microsoft\Diagnosis\ETLLogs\RbTel-Merge.etl
2020-03-31 16:55:59, Info pCopyTelemetryFile: Wrote CV abK4cXKUAECOKPZl to ETL C:\ProgramData\Microsoft\Diagnosis\ETLLogs\RbTel-Merge.etl:$ETLUNIQUECVDATA
2020-03-31 16:55:59, Info Copy etl files: source: C:\$WINDOWS.~BT\Sources\Panther\RbTel-Merge1.etl, destination: C:\ProgramData\Microsoft\Diagnosis\ETLLogs\RbTel-Merge1.etl
2020-03-31 16:55:59, Info pCopyTelemetryFile: Wrote CV abK4cXKUAECOKPZl to ETL C:\ProgramData\Microsoft\Diagnosis\ETLLogs\RbTel-Merge1.etl:$ETLUNIQUECVDATA
2020-03-31 16:55:59, Info Diagtrack service is running
2020-03-31 16:55:59, Warning Either AlwaysRestartDiagTrack was specified, or ForceUpload failed with error code=0x0, restarting the diagtrack service to upload the etl
2020-03-31 16:55:59, Info Restart Diagtrack service successfully
2020-03-31 16:55:59, Info Delete all etl files because this is an async upload request.
2020-03-31 16:55:59, Info SP Rollback-Online-User submitting watson report synchronously
2020-03-31 16:55:59, Info DIAGER DiagERInitialize:Entry Also Initialized the log
2020-03-31 16:55:59, Info DIAGER IDiagER::IDiagER:Entry
2020-03-31 16:55:59, Info DIAGER CWfpER::Initialize:Entry
2020-03-31 16:55:59, Info DIAGER CWfpER::Initialize:Entry
2020-03-31 16:55:59, Info DIAGER Consent Value = HKCU\Software\Microsoft\Windows\Windows Error Reporting\Consent!WinSetupDiag02 has been set to 4
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Info Failed to get watson parameter override. Hr=[0x80070002]
2020-03-31 16:55:59, Warning Failed to delete watson parameter overrides. Hr=[0x80070002]
2020-03-31 16:55:59, Info Watson Bucketing Parameters[0] = 1
2020-03-31 16:55:59, Info Watson Bucketing Parameters[1] = 2
2020-03-31 16:55:59, Info Watson Bucketing Parameters[2] = 9
2020-03-31 16:55:59, Info Watson Bucketing Parameters[3] = 1
2020-03-31 16:55:59, Info Watson Bucketing Parameters[4] = 0x0
2020-03-31 16:55:59, Info Watson Bucketing Parameters[5] = 0x50015
2020-03-31 16:55:59, Info Watson Bucketing Parameters[6] = 9600
2020-03-31 16:55:59, Info Watson Bucketing Parameters[7] = winblue_r4
2020-03-31 16:55:59, Info Watson Bucketing Parameters[8] = 18362
2020-03-31 16:55:59, Info Watson Bucketing Parameters[9] = 19h1_release
2020-03-31 16:55:59, Info DIAGER DiagERAddBucketingParameters:Entry
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Entry
2020-03-31 16:55:59, Info DIAGER IDiagER::AddBucketingParameters:Entry
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=1
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=2
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=9
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=1
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=0x0
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=0x50015
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=9600
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=winblue_r4
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=18362
2020-03-31 16:55:59, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=19h1_release
2020-03-31 16:55:59, Info DIAGER DiagERSetHeader:Entry
2020-03-31 16:55:59, Info DIAGER CWfpER::SetHeader:Entry
2020-03-31 16:55:59, Info DIAGER IDiagER::SetHeader:Entry
2020-03-31 16:55:59, Info DIAGER CWfpER::SetHeader:Setting header=Microsoft Windows Installation encountered a problem and needs to close. We are sorry for the inconvenience
2020-03-31 16:56:00, Info CDiagnosticsHelper::GetWatsonFilesToAttach: Attaching file C:\$WINDOWS.~BT\Sources\Panther\SetupAct.log
2020-03-31 16:56:00, Info CDiagnosticsHelper::GetWatsonFilesToAttach: Attaching file C:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
2020-03-31 16:56:00, Info CDiagnosticsHelper::GetWatsonFilesToAttach: Attaching file C:\$WINDOWS.~BT\Sources\rollback\setupact.log
2020-03-31 16:56:00, Info DIAGER DiagERAddFiles:Entry
2020-03-31 16:56:00, Info DIAGER CWfpER::AddFiles:Entry
2020-03-31 16:56:00, Info DIAGER IDiagER::AddFiles:Entry
2020-03-31 16:56:00, Info DIAGER CWfpER::AddFiles:Adding file=C:\$WINDOWS.~BT\Sources\Panther\SetupAct.log
2020-03-31 16:56:00, Info DIAGER CWfpER::AddFiles:Adding file=C:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
2020-03-31 16:56:00, Info DIAGER CWfpER::AddFiles:Adding file=C:\$WINDOWS.~BT\Sources\rollback\setupact.log
2020-03-31 16:56:00, Info DIAGER DiagERSubmitEx:Entry
2020-03-31 16:56:00, Info DIAGER CWfpER::Submit:Entry
2020-03-31 16:56:04, Info DIAGER Watson Error Report submitted and Result=1
2020-03-31 16:56:04, Info DIAGER DiagERTerminate:Entry
2020-03-31 16:56:04, Info DIAGER CWfpER::~CWfpER:Entry
2020-03-31 16:56:04, Info DIAGER Consent Value = HKCU\Software\Microsoft\Windows\Windows Error Reporting\Consent!WinSetupDiag02 has been cleaned out
2020-03-31 16:56:04, Info DIAGER IDiagER::~IDiagER:Entry
2020-03-31 16:56:04, Info SP Rollback-Online-User completed successfully.
2020-03-31 16:56:05, Info Persisting diagnostics data to C:\$WINDOWS.~BT\Sources\Diagnostics\diagnostics.dat
2020-03-31 16:56:05, Info Diagnostics data saved successfully
Thank you in advance for your help,
Marc.
Continue reading...