F
FallFromInfinity
Guest
So I've been getting a few crashes recently, but the computer has just outright halted and restarted. There has been no actual bluescreen, per se, but when returning from the crash, Event Viewer shows the standard entry that occurs during bluescreens, and the system created additional minidumps from the crashes.
I've used NirSoft's BlueScreenView to review them, but I can find no real information from them.
The crash has been CRITICAL_OBJECT_TERMINATION, bugcheck 0x000000f4 every time.
I've linked the two most recent crashes, which have been identical as far as I can see, the only differences being parameter 2, 3, 4, and the timestamps.
I would like to find what hardware or driver it is on my system causing the faults, but the "faulting module" according to the dumps appears to be ntoskrnl.exe which provides no real information to me.
I have done scans time and time again... multiple 10 and 20 pass memory tests, chkdsk, WD's DataDiag (both quick and extended tests) and have found absolutely nothing between my harddrives and memory. I cannot tell what the issue is, as the crashes have happened at random times. One time, it was while surfing the web, with only a few basic background programs running, and the other was while playing a semi-graphic intensive game... during neither circumstance was my RAM, CPU, or GPU anywhere near max load. And the psu should be well above necessary for the system.
I have also done SFC scans in order to figure out if the issue was the operating system, but that also cleared without any problems.
Both CPU and GPU temperatures at time of crash (or the last time I checked just before the crash) were less than 60C, so it's highly unlikely it was temperature related.
I'm hoping someone can give me some insight as to what specifically is causing the problem, from these dumps and the information of the system I'm providing, because I am clueless as to what is causing the issue.
----------------------------------------------------------------
System Specs:
OS: Windows 7 Ultimate SP1 x64
Motherboard: MSI 970A-G43 (MS-7693)
Chipset: AMD 970 (RX980) + SB920/SB950
CPU: AMD FX- 4150 4.0GHz
Memory: 2x Kingston HyperX Black KHX1600C9D3/4GX (2x4GB)
GPU: XFX Radeon R7 360
HDD1: WDC WD5000AAKX (500GB)
HDD2: Seagate ST1000DM003 (1TB)
PSU: Ultra Modular X4 Special edition 750W
Mouse: SteelSeries Sensei Raw
KB: SteelSeries Apex
HDMI to a TV for monitor/audio.
4x 80mm & 1x 120mm LED Case Fans (cleaned monthly) using Molex connectors, and an LED case light using Molex as well.
The rest of the case gets cleaned about every 3 months, with all components being removed from the case.
The CPU and heatsink are cleaned and re-seated every 6 months with new thermal paste.
All drivers up to date to the most "stable" versions.
Dumps:
Most recent - https://www.dropbox.com/s/5wot7r0d52c80da/060616-29920-01.dmp?dl=0
Previous (appears identical) - https://www.dropbox.com/s/78cx4vk1f419r6m/052716-27580-01.dmp?dl=0
DxDiag - https://www.dropbox.com/s/k1uac4fbouwapbc/DxDiag-160606.txt?dl=0
Continue reading...
I've used NirSoft's BlueScreenView to review them, but I can find no real information from them.
The crash has been CRITICAL_OBJECT_TERMINATION, bugcheck 0x000000f4 every time.
I've linked the two most recent crashes, which have been identical as far as I can see, the only differences being parameter 2, 3, 4, and the timestamps.
I would like to find what hardware or driver it is on my system causing the faults, but the "faulting module" according to the dumps appears to be ntoskrnl.exe which provides no real information to me.
I have done scans time and time again... multiple 10 and 20 pass memory tests, chkdsk, WD's DataDiag (both quick and extended tests) and have found absolutely nothing between my harddrives and memory. I cannot tell what the issue is, as the crashes have happened at random times. One time, it was while surfing the web, with only a few basic background programs running, and the other was while playing a semi-graphic intensive game... during neither circumstance was my RAM, CPU, or GPU anywhere near max load. And the psu should be well above necessary for the system.
I have also done SFC scans in order to figure out if the issue was the operating system, but that also cleared without any problems.
Both CPU and GPU temperatures at time of crash (or the last time I checked just before the crash) were less than 60C, so it's highly unlikely it was temperature related.
I'm hoping someone can give me some insight as to what specifically is causing the problem, from these dumps and the information of the system I'm providing, because I am clueless as to what is causing the issue.
----------------------------------------------------------------
System Specs:
OS: Windows 7 Ultimate SP1 x64
Motherboard: MSI 970A-G43 (MS-7693)
Chipset: AMD 970 (RX980) + SB920/SB950
CPU: AMD FX- 4150 4.0GHz
Memory: 2x Kingston HyperX Black KHX1600C9D3/4GX (2x4GB)
GPU: XFX Radeon R7 360
HDD1: WDC WD5000AAKX (500GB)
HDD2: Seagate ST1000DM003 (1TB)
PSU: Ultra Modular X4 Special edition 750W
Mouse: SteelSeries Sensei Raw
KB: SteelSeries Apex
HDMI to a TV for monitor/audio.
4x 80mm & 1x 120mm LED Case Fans (cleaned monthly) using Molex connectors, and an LED case light using Molex as well.
The rest of the case gets cleaned about every 3 months, with all components being removed from the case.
The CPU and heatsink are cleaned and re-seated every 6 months with new thermal paste.
All drivers up to date to the most "stable" versions.
Dumps:
Most recent - https://www.dropbox.com/s/5wot7r0d52c80da/060616-29920-01.dmp?dl=0
Previous (appears identical) - https://www.dropbox.com/s/78cx4vk1f419r6m/052716-27580-01.dmp?dl=0
DxDiag - https://www.dropbox.com/s/k1uac4fbouwapbc/DxDiag-160606.txt?dl=0
Continue reading...